activesync 4.1 help

aaronmere's picture
Submitted by aaronmere on Thu, 18/05/2006 - 23:18. General | Software

just recieved my new HTC Wizard today love it with 1 problem. My first ActiveSync connection went flawlessly but when i went to update it will now only continuously try and connect, never actually connecting and i get a network connection error saying limited or no connection due to validation of ip address. im stumped. i must have inadvertently did something to change settings either on my notebook or the wizard.

any help?

thanks

--


login or register to post comments | previous forum topic | next forum topic | delicious | digg | reddit | technorati | 1561 reads


Try opening active sync in
Carty's picture
Submitted by Carty on Sat, 20/05/2006 - 10:09.

Try opening active sync in pc and delete the partnership which you would have made previously. Then connect the device and see.

www.cartystudios.com

--
Click here..


login or register to post comments
Active Sync - Receiving settings
pdagenius's picture
Submitted by pdagenius on Wed, 08/11/2006 - 14:56.

I currently have the same issue - the first sync happened but subsequently the MDA Vario will not sync. All I get on the pc is "Receiving Settings" which actually do not get received. The MDA only has a record of the first sync and no subsequent tries. It seems that communication from the pc works ok in that I can tranfered and install new programs. I started with Active Sync 4.1 and have also tried 4.2 and 4.5 beta all to no avail. Can anyone suggest a way forward please.

--


login or register to post comments
Posted this on previous thread but..........
juanmedg's picture
Submitted by juanmedg on Fri, 10/11/2006 - 21:13.

..........Try this: I'had problems with active sync. I' foun a way to fix the problem. On your MDA go to start, settings > conections > USB to PC. Uncheck "Enable advanced network fuctionality" That should fix the problem. Hope this helps :) !

--

--


login or register to post comments
Posted this on previous thread but..........
juanmedg's picture
Submitted by juanmedg on Fri, 10/11/2006 - 21:13.

..........Try this: I'had problems with active sync. I' foun a way to fix the problem. On your MDA go to start, settings > conections > USB to PC. Uncheck "Enable advanced network fuctionality" That should fix the problem. Hope this helps :) !

--

--


login or register to post comments
Same problem
MN-Internet's picture
Submitted by MN-Internet on Thu, 19/04/2007 - 17:50.

I did your fix and it connected and started the sync, finally.
Now it comes up with an error ---------------------------
Microsoft ActiveSync
---------------------------
ActiveSync encountered a problem on the desktop.

Support Code:85010014
---------------------------
OK
---------------------------

Now what do I do?
Thanks,
randy-

--
If GOD wanted man not to have a woman, he would of not made EVE, he would of made Billy-Bob!

login or register to post comments